Medical Spike Connector Manufacturing
VEM manufactures injection molded PP and PC spike connector components for infusion, IV fluid transfer and medical fluid handling systems. We support high-volume medical plastic production with ISO 13485 controls, cleanroom molding in Thailand and Shenzhen-built tooling.
Contact us
Injection molded spike components for medical fluid transfer
Medical spike connector components require controlled tip geometry, low flash, burr-free molding, reliable connector fit and consistent fluid path openings. VEM supplies molded plastic spike components for customers that complete final assembly at their own site or with their selected assembly partner.
Medical spike connector injection molding capabilities
VEM supports high-volume molded spike connector components for infusion systems, IV fluid transfer, vial or bag connection and medical fluid handling applications.
Medical spike connectors
Injection molded spike connector components with controlled tip geometry, connector interfaces and fluid path openings.
IV fluid transfer components
Molded PP and PC parts for IV fluid transfer applications, fluid source interfaces and downstream medical assemblies.
Infusion spike components
Plastic spike components for infusion systems and medical fluid handling devices where fit and molded geometry are critical.
PP and PC molding
Support for PP and PC spike connector components, with opaque or transparent molding depending on customer requirements.
High-volume production
Best suited for production programs from 500k+ parts per year, with scalable molding capacity in Thailand.
Tooling support
Molds are built by VEM Shenzhen, with engineering support for mold design, production readiness and long-term maintenance.
Controlled spike geometry and connector-end dimensions
Spike connector components need clean molded edges, stable part geometry and controlled connector-end dimensions. VEM reviews these requirements during DFM and tool design to reduce production risk before high-volume molding starts.
- Controlled spike tip dimensions
- Burr-free and low-flash molding focus
- Connector fit and interface control
- Fluid path opening consistency
- Dimensional inspection based on customer drawings
Dimensional and visual inspection for spike connector components
For this product scope, VEM supplies injection molded components rather than finished assemblies. Inspection focuses on dimensional conformity, molded feature quality and visual checks based on customer specifications.
- Dimensional inspection based on customer drawings
- Visual inspection for molding defects
- Connector interface checks
- Spike tip and fluid path feature inspection
- Lot and batch traceability through ERP
- Customer audits welcomed as standard practice
Cleanroom molding for medical spike connector components
VEM offers ISO 8 cleanroom molding for many medical spike connector programs, with ISO 7 available where customer requirements are stricter. The right cleanroom level depends on the component use, customer specification and downstream assembly process.
ISO 8 cleanroom molding
Practical cleanroom setup for many medical molded component programs before customer-side assembly.
ISO 7 available
Available for stricter cleanliness requirements or higher-risk medical component programs.
Thailand production
Injection molding is performed in Thailand, supported by Shenzhen-built molds and VEM engineering resources.
High-volume production for medical fluid handling components
VEM is best suited for established medical device programs that need repeatable high-volume production. For medical spike connector components, the preferred project fit is typically 500k+ molded parts per year.
- High-volume injection molding in Thailand
- Multi-cavity tooling support
- Hot runner tooling available where suitable
- In-house mold maintenance and correction support
- Long-term production support for medical OEM programs
ISO 13485 quality support for medical spike connector molding
VEM supports medical customers with ISO 13485 production controls, process validation support and customer-specific documentation. The validation scope is defined together with the customer based on part risk, drawing requirements and production expectations.
- ISO 13485 quality management system
- IQ, OQ and PQ support where required
- Process validation support
- CPK studies where required
- ERP-based lot and batch traceability
- Customer audit support
Medical spike connector tooling and production process
RFQ review
Drawing, 3D file, material, annual volume, cleanroom need and inspection requirements are reviewed.
DFM
VEM reviews moldability, spike tip geometry, connector interfaces and production risks before tool design.
Tooling
Molds are built by VEM Shenzhen, including multi-cavity tooling where suitable for high-volume production.
Validation
Process validation, IQ/OQ/PQ and CPK studies are supported based on customer requirements.
Production
High-volume molding, inspection, traceability and production documentation are managed by VEM Thailand.
Applications for medical spike connector components
IV fluid transfer
Molded spike connector components for IV fluid transfer systems and fluid source interfaces.
Infusion systems
PP and PC spike components for infusion-related medical fluid handling applications.
Vial and bag connection
Plastic spike connector components for customer-side assembly into vial, bag or fluid transfer systems.
Medical spike connector manufacturing FAQ
Does VEM manufacture finished spike connector assemblies?
For this product scope, VEM supplies injection molded spike connector components. Final assembly is typically completed by the customer or their selected assembly partner.
Which materials does VEM use for medical spike connector components?
Typical materials include PP and PC. Parts are often white, but transparent molding may be possible depending on customer requirements and material selection.
Can VEM mold transparent spike connector components?
Yes, depending on the material and customer specification. VEM can support transparent PC components where visibility or product design requires it.
Is cleanroom molding available?
Yes. VEM supports ISO 8 cleanroom molding for many medical spike connector programs, with ISO 7 available for stricter requirements.
Does VEM perform leak or flow testing on these parts?
For injection molded spike connector components only, VEM typically performs dimensional and visual inspection. Leak or flow testing is usually handled at the assembly level, unless otherwise specified by the customer.
What production volumes are suitable?
VEM is best suited for high-volume medical spike connector programs, typically around 500k+ molded parts per year.
Where are the molds and parts produced?
Molds are built by VEM Shenzhen. Injection molding and production support are handled by VEM Thailand.